TKE  943

3-axis CNC machining centre with moving gantry structure, designed for drilling, milling and threading on bars or workpieces of aluminium, PVC, light alloys in general and steel. The moving part of the machine consists of a gantry with precision rack and pinion drive. The 8,5 kW electrically-driven spindle with ISO 30 tool holder allows machining operations, including heavy-duty work, with optimum results in terms of speed and accuracy. The machine can be used in double mode (7000 model) so as to minimize machine downtime, as it is possible to change the workpiece (load/ unload) and the automatic setting of the vices in "concealed" time. It is also possible to load and consequently machine different workpieces between the two work areas. The automatic tool magazine for 4.000 mm version is available in a fixed solution on board the machine with 4/8 places, recommended for single place machining. Otherwise a 12-place automatic magazine on board the carriage, ideal to allow a faster tool change and useful for the double mode machining, is available. The 7.000 version is supplied with the 12-place automatic magazine on board the carriage. The gantry is provided with a guard which, besides protecting the operator, also reduces the noise impact on the environment.

Technical data arrow_drop_down
AXIS STROKES 
X AXIS (longitudinal) (mm)
4.000 ; 7.000
Y AXIS (transversal) (mm)
1.070
Z AXIS (vertical) (mm)
550
ELECTROSPINDLE 
Maximum power in S1 (kW)
8,5
Maximum speed (rpm)
24.000
Toolholder cone (Tekna special piece)
ISO 30
WORKABLE SIDES 
With direct tool (upper side)
1
With angular head (lateral sides, heads)
2 + 2
WORK AREA 
AUTOMATIC TOOL MAGAZINES (4,000 version) 
Automatic 12-place tool magazine on board the gantry
 
Number of angle machining heads which can be loaded onto the automatic magazine
2
Maximum size of tools which can be loaded onto the revolver magazine (mm)
Ø = 180 - L = 200
Fixed left 4-place tool magazine
 
Fixed left 8-place tool magazine
 
Maximum size of tools which can be loaded onto the 4/8-place magazine (mm)
Ø = 120 - L = 180
Fixed left 7-place tool magazine
 
Number of angle machining heads which can be loaded onto the 7-place magazine
2
Maximum size of tools which can be loaded onto the 7-place magazine (mm)
Ø = 180 - L = 200
AUTOMATIC TOOL MAGAZINE (7,000 version) 
Automatic 12-place tool magazine on board the gantry
 
Number of angle machining heads which can be loaded onto the automatic magazine
2
Maximum size of tools which can be loaded onto the revolver magazine (mm)
Ø = 180 - L = 200
TAPPING CAPACITY (with tap on aluminium and through hole) 
With compensator
M8
PROFILE POSITIONING 
Workpiece reference retractable manual side stops
 
Workpiece reference fixed side stops
2
WORKPIECE LOCKING 
Standard number of pneumatic vices (4,000 - 7,000)
4 – 8
Maximum number of pneumatic vices (4,000 - 7,000)
12 – 16
Manual vice positioning
 
Double horizontal hold-down devices on pneumatic vices for the machining of two parallel profiles
 
Included       
Available
Tool magazine

The automatic tool magazine comes in two different configurations. The first has one or two fixed 4/8-place magazines installed on the left-hand side of the machine and is specific for operation on a single work area in single or multi-piece mode. The second configuration excludes or integrates the fixed magazines, with an automatic 12-place magazine installed on the carriage moving on the X axis. This solution, required for machining in double operation mode (mod. 7000 mm only), considerably reduces the tool change times and consequently increases the machine productivity and efficiency.

TKE 943 Tool magazine Tekna
TKE 943 Vices Tekna
Vices

The vice unit can ensure the correct and safe clamping of large aluminium, steel and light alloy profiles. The vice size and the long Y stroke of the electrospindle allow machining large profiles for all kinds of civil and industrial applications. Each unit slides on the machine table, positioning is manual. Counterblocks can be mounted quickly and accurately making the machine extremely versatile. The vice unit is available optionally in double hold-down device version to machine two profiles in parallel.

Electrospindle

The 8.5 kW electrospindle in S1 is equipped with automatic tool change and air cooling with electric fan. With its high torque value, it can also perform heavy-duty machining that is typical of the industrial sector. It can be used both with some types of extruded steel and with aluminium profiles, thanks to the lubrication system with oil emulsion spray mist or, as an option, with minimal diffusion oil.

TKE 943 Electrospindle Tekna
TKE 943 Profile positioning Tekna
Profile positioning

The machine is equipped with two sturdy and precise fixed or manual retractable reference stops, used to machine one or two profiles in multi-piece or double operation mode (model 7,000 only). A laser system is available for accurately positioning the workpieces on the work surface; it reads each profile and sets the reference without the need for mechanical stops.

Additional vices (Optional)

If necessary, it is possible to install additional vices beyond the standard machine equipment. In this way, it is possible to ensure perfect clamping of bars or bar sections even in complex cases in terms of number, size or types of profiles to be machined. Moreover, the additional vices allow greater versatility in vice position depending on the length of the workpieces and the machining to be performed.

TKE 943 Additional vices Tekna
TKE 943 Dimensional profile measurer Tekna
Dimensional profile measurer (Optional)

The machine can be optionally equipped with an electronic device that automatically corrects workpiece dimensional errors in length, width and height. In this way, the accuracy of the machine is not influenced by the differences between theoretic and actual workpiece dimensions during machining. This device accurately probes the rough workpiece in several positions, correcting the machining along its whole length, even with deformed or warped profiles.

Other Products