TKE  955

Mobile gantry 5-axis CNC machining centre for drilling, milling and tapping, at any angle from -90° to +90°, on profiles and plates with a thickness up to 10 mm if made of aluminium, lightweight alloys and PVC and up to 2 mm if made of steel. The mobile part of the machine is composed of a dual drive gantry on a high precision rack. The local guarding cabin, made of technopolymer, has been designed to offer optimal functionality, accessibility, soundproofing and lighting while fulfilling safety and ergonomics requirements. Large glass windows allow the operator to monitor the machining operations being executed, as well as an easy access during cleaning and maintenance phases. The inside of the cabin ensures the conveying of swarf into the collection system available at the base. The 11 kW electrospindle allows performing machining operations, even heavy-duty ones, with optimal results in terms of speed and precision. The tool magazine integrated into the mobile gantry can house 10 tools; a second magazine features two special positions for a blade with a diameter of 400 mm and a second blade with a diameter of 180 mm. It features two different operating modes: the first, in single-area mode, allows machining entire bars having a maximum length of 7 or 9 m in a single work area; the second one, in tandem machining mode, allows machining several workpieces in the two different work areas. In the version with system for moving vices on H and P axes, it is possible to use the machine in dynamic tandem machining mode; this operating mode allows reducing machine downtimes to a minimum, since it allows the vices to be automatically set, in concurrent operation time, to the operation processes of the spindle in the opposite work area. TKE955 is equipped with a laser scanner allowing the most precise and advanced control of the machine front access, raising safety and operator/machine interface standards. In tandem machining mode, the laser scanner allows programming asymmetrical work areas on X axis so that workpieces having different sizes can be machined by making use of 4 different set-ups, in order to increase machine operation flexibility.

Technical data arrow_drop_down
X AXIS (longitudinal) (mm)
7.500 ; 9.700
Y AXIS (transversal) (mm)
Z AXIS (vertical) (mm)
A AXIS (head vertical-horizontal rotation)
-90° ÷ +90°
C AXIS (rotation on head vertical axis)
0° ÷ 360°
H AXIS (vice position.) (TKE 955 HP) (mm)
6.600 ; 8.600
P AXIS (vice position.) (TKE 955 HP) (mm)
6.600 ; 8.600
A axis positioning increases
C axis positioning increases
Maximum power in S1 (kW)
Maximum power in S6 (60%) (kW)
Maximum speed (rpm)
Maximum torque in S6 (Nm)
Toolholder cone
HSK – 63F
Water cooling with chiller unit
Encoder on electrospindle for rigid tapping
With direct tool (upper face, side faces, heads)
With blade tool Ø 400 mm (upper face, side faces, heads)
1 + 2 + 2
10-place automatic tool magazine on board the carriage
Maximum size of tools that can be loaded onto the magazine – 10 central positions (mm)
Ø = 80 - L = 170
Maximum diameters of blades which can be loaded onto the magazine– 2 side positions (mm)
Ø = 400 - Ø = 180
400 mm Ø blade
Presetting tool device: automatic on-machine tool length measurement
TAPPING CAPACITY (with tap on aluminium and through hole) 
Static double operation (according to model)
Dynamic double operation (according to model)
Basic multi-step machining - up to 5 steps
Bar repositioning for cut and separation
Machining with autofeed system: milling and separation from the bar, with automatic cycle
Extended machining, up to twice the maximum nominal length in X
Cut and separation from the bar
Automatic management of multi-step mode machining
Multiple probe dimensioning module
Multi-piece and multi-piece swing mode machining
Printing labels in customised format
Standard number of pneumatic vices
Maximum number of pneumatic vices
Maximum number of vices per area
Vice automatic positioning through independent H and P axes (according to model)
Tool magazine
The toolholder magazine has 10 positions on the operator's side and an additional two-place magazine for Ø400 and Ø180 mm blades on the operator's on the rear side. The position of the magazine, installed on board the gantry, allows minimising the tool change times and optimising the work cycles. The housing of the toolholder cones is separated from the machining area for a better magazine cleaning.
Steel TKE 955 Tool magazine Tekna
Steel TKE 955 Vices and dynamic tandem Tekna
Vices and dynamic tandem

The vice unit can ensure the correct and safe clamping of large aluminium, steel and light alloy profiles. The vice structure, in particular the wide Y stroke, allows the machining of large profiles, thus meeting the typical requirements of industrial and door applications. Each vice unit can be configured with double hold-down device for the machining of two parallel profiles. In the HP version, vice positioning is managed by additional CNC axes. In dynamic double operation mode, the CNC simultaneously manages the movement of the vices and of the mobile gantry in the two separate work areas, thus allows significant increases in productivity.

Full protection cabin

The local guarding cabin has been designed to offer optimal functionality, accessibility and lighting while fulfilling safety and ergonomics requirements. The innovative and refined design makes the machine unique and unmistakeable. Large glass windows allow the operator to monitor the machining operations being executed and a large access to internal areas is provided for cleaning and maintenance operations. The internal structure optimises the conveying of swarf and scraps to the lower side, simplifying the maintenance and cleaning phases on all delicate parts.

Steel TKE 955 Full protection cabin Tekna
Steel TKE 955 Electric head Tekna
Electric head
The 11 kW electrospindle in S1 with HSK-63F toolholder with encoder for heavy-duty machining and rigid tapping, water cooling with chiller unit, allows even heavy machining operations, typical of the industrial sector. Electrospindle rotation along A and C axes allows working on 5 faces of the profile, with no need of repositioning.
Laser scanner
The protection of the operator is entrusted to a monitoring system of the work area with laser scanner. This intelligent control system, together with the absence of fixed references at the centre of the machine, is specially useful in double operation mode, since it allows managing the two work areas with a variable set-up, even asymmetrical, programming them from time to time. The machine is safe and flexible at the same time, suited to different work requirements.
Steel TKE 955 Laser scanner Tekna
Steel TKE 955 Label printer Tekna
Label printer (Optional)

The industrial label printer allows each cut profile to be identified with identifying features from the cutting list. In addition, barcode printing enables easy identification of the profile itself, which is particularly useful for subsequent machining steps on Machining Centres or assisted assembly lines.

Other Products